Stannah Goods & Service Lifts

Stannah 100kg Microlift

The larger capacity Microlift is ideal for busy catering environments, pubs, clubs and restaurants and industrial applications. Two standard lift car sizes are offered, in either dumbwaiter form with counter serving rise and fall shutters, or service lift form with floor level serving hinged doors. Other sizes are available as special options.

Technical Data
Model	Capacity	Car Dimensions (w × d × h)	Entrance (w × h)	Serving Height (variable)	Shaft (w × d)	Pit Depth	Headroom
100A	100kg	720 × 720 × 1000	620 × 970	800	1000 × 1000	-	2800
WITH RISE AND FALL SHUTTERS			620 × 970	800	1000 × 1000	-	2800
100A	100kg	720 × 720 × 1000	550 × 890	FLOOR	1000 × 1000	350*	2000
WITH HINGED DOORS			550 × 890	FLOOR	1000 × 1000	350*	2000
100B	100kg	820 × 820 × 1200	720 × 1170	800	1100 × 1100	-	3000
WITH RISE AND FALL SHUTTERS			720 × 1170	800	1100 × 1100	-	3000
100B	100kg	820 × 820 × 1200	600 × 1090	FLOOR	1100 × 1100	350*	2200
WITH HINGED DOORS			600 × 1090	FLOOR	1100 × 1100	350*	2200

Notes

All dimensions are nominal and in mm

Some of the dimensions can be varied to suit individual requirements by modification of stock models or by special manufacture – please contact us for details.

Entrances are available on three sides (A,B & C) on all floors.

* For 100kg lifts with hinged door option, if floor level serving height is required then a pit will be necessary. A reduction in the pit depth is possible – please contact us for details.

Datasheets giving further technical information are available from the Download Centre.

Specification

Car

Constructed in mild steel, finished in grey baked enamel with a stainless steel base and a removable stainless steel shelf. The car can also be finished in stainless steel.

Speed

0.35m/s

Entrances

High quality, smooth operation rise and fall shutters are fitted with safety locks and can be finished in either grey baked enamel or stainless steel. Hinged doors are available as an option on all models.

Car entrance protection

To meet the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations, the lift car is supplied with car entrance protection as standard. This protects goods from falling whilst the lift is in motion.

Entry choice

Up to three entrances can be fitted on each floor.

Control

Fully automatic push button control with call and despatch facilities at each entrance for ease of use.

Indicators

“Lift arrival”, “lift occupied” and “lift position” indicators are fitted at each entrance, together with an audible lift arrival buzzer.

Travel

Up to 12 stops over a total distance of 36m of travel.

Mounting

The Microlift is supplied in a structure-supported frame which is galvanised for longer life. We do not require a separate motor room or “load-bearing” lift shaft. For details, please ask for our builders work details.

Motor

Mounted at the top of the lift structure, the smooth, quiet motor drives a high quality reduction gearbox fitted with a traction vee-sheave. An electro-magnetic disc brake is supplied, with emergency release mechanism. The reliable controller and counter-balance drive system ensure electrical consumption is minimal.

Safety

Complies with the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations 1992, also known as the Machinery Directive and EN 81-3 where applicable.

Additional options include

Heated car, additional and/or heated shelves, intercom system and load weighing.

Safe Maintenance Access

A service engineer must be able to access the motor compartment in a safe manner. The lift owner must provide a safe means of access up to the motor compartment. Access doors to the motor compartment are required on one or two faces of the lift shaft, depending on the configuration of the lift. The doors must be hinged and lockable.

Our builders work drawings contain more detailed information on this topic but please do not hesitate to contact us if you have any questions.

For further advice please contact us on 01264 351922.