Stannah 50/100kg Double Decker Microlift

The Double Decker provides two lift cars in the same shaft, ideal where space is restricted. Loading and serving is at floor and counter levels. The lower car entrance has a hinged gate, the upper car has rise and fall shutters.

 

Technical Data
Model	Capacity	Car Dimensions (w × d × h)	Entrance (w × h)	Serving Height (variable)	Shaft (w × d)	Pit Depth	Headroom
50B DD	100kg	520 × 520 × 800	420 × 770	(a) 1010 (b) Floor	800 × 800	350	3000
50C DD	100kg	620 × 620 × 800	520 × 770	(a) 1010 (b) Floor	900 × 900	350	3000
100A DD	100kg	720 × 720 × 800	620 × 770	(a) 1010 (b) Floor	1000 × 1000	350	3000
100B DD	100kg	820 × 820 × 800	720 × 770	(a) 1010 (b) Floor	1100 × 1100	350	3000

Specification

Car

Constructed in mild steel, finished in grey baked enamel with a stainless steel base and a removable stainless steel shelf. The car can also be finished in stainless steel.

Speed

0.35m/s

Entrances

High quality, smooth operation rise and fall shutters are fitted with safety locks and can be finished in either grey baked enamel or stainless steel. Hinged doors are available as an option on all models.

Car entrance protection

To meet the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations, the lift car is supplied with car entrance protection as standard. This protects goods from falling whilst the lift is in motion.

Entry choice

Up to two entrances can be fitted on each floor.

Control

Fully automatic push button control with call and despatch facilities at each entrance for ease of use.

Indicators

Lift arrival”, “lift occupied” and “lift position” indicators are fitted at each entrance, together with an audible lift arrival buzzer.

Travel

Up to 12 stops over a total distance of 36m of travel.

Mounting

The Microlift is supplied in a structure-supported frame which is galvanised for longer life. We do not require a separate motor room or “load-bearing” lift shaft. For more information, please ask for our builders work details.

Motor

Mounted at the top of the lift structure, the smooth, quiet motor drives a high quality reduction gearbox fitted with a traction vee-sheave. An electro-magnetic disc brake is supplied, with emergency release mechanism. The reliable controller and counter-balance drive system ensure electrical consumption is minimal.

Safety

Complies with the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations 1992, also known as the Machinery Directive and EN 81-3 where applicable.

Additional options include

Heated car, additional and/or heated shelves, intercom system and load weighing.

Safe Maintenance Access

A service engineer must be able to access the motor compartment in a safe manner. The lift owner must provide a safe means of access up to the motor compartment. Access doors to the motor compartment are required on one or two faces of the lift shaft, depending on the configuration of the lift. The doors must be hinged and lockable.

Our builders work drawings contain more detailed information on this topic but please do not hesitate to contact us if you have any questions.

For further advice please contact us on 01264 351922.