Stannah Service & Goods Lifts
Goodsmaster Classic
Our traditional goods-only Goodsmaster Classic range has 13 models that can carry from 500 - 1500kg. (Please contact Stannah if you require larger lifts outside of this range.)
The lifts are designed to make easy work of heavy loads and they are particularly used to reach elevated storage areas, often on mezzanine levels. Goodsmasters are installed within their own structure almost anywhere in a matter of days (subject to builders’ work). With a choice of hinged or concertina doors, there is a Goodsmaster for almost every situation.
Specifications
Car
Constructed from mild steel sheeting; finished in a tough grey baked enamel RAL 7038 with heavy duty vinyl covered floor.
Speed
0.13–0.20m/s
Entrances
Single hinged steel door on 1060mm wide lift cars. Double hinged steel doors on 1360mm and 1460mm wide lift cars. Finished in grey baked enamel RAL 7038. Collapsible concertina gates are available as an option on all Goodsmaster Classic models.
Car entrance protection
A collapsible gate is fitted to the lift car entrance(s) as standard.
Entry choice
Up to two entrances can be fitted on each floor (single entrance or through-car).
Controls
Fully automatic push button control with call and despatch facilities at each landing entrance.
Indicators
“Lift arrival” and “lift occupied” indicators are fitted at each entrance for extra reassurance, together with an audible lift arrival buzzer.
Travel
Up to 5 stops over a total distance of 15m of travel.
Mounting
The Goodsmaster Classic is supplied in a structure supported frame which does not need load-bearing shaft walls. A solid flat base, support at each floor and at the top, together with a pre-formed lift shaft by your builder, is all that is required. Stannah can supply non-fire rated sheet steel shaft cladding in RAL 7038 as an option.
Motor/winding unit
Mounted on a bedplate fixed to the lift’s structure (external to the shaft). The motor drives a high quality reduction gearbox with 2:1 traction roping (3:1 on 1500kg model). Efficient and quiet in operation.
Safety
Goodsmaster Classic models comply with the Essential Safety Requirements (ESRs) of the Supply of Machinery (Safety) Regulations, also known as the Machinery Directive.
Technical Data
| Model | Capacity | Car Dimensions (w × d × h) |
Entrance (w × h) |
Shaft (w × d) |
Pit Depth |
Headroom |
|---|---|---|---|---|---|---|
| 500B 750B 1000B |
500kg 750kg 1000kg |
1060 × 1235† × 2000 | 1010 × 2000 | 1650 × 1500 | 150 | 2800 2800 3000 |
| 500EU 750EU 1000EU |
500kg 750kg 1000kg |
1360 × 1235† × 2000 | 1310 × 2000 | 1950 × 1500 | 150 | 2800 2800 3000 |
| 750S 1000S |
750kg 1000kg |
1060 × 1735† × 2000 | 1010 × 2000 | 1650 × 2000 | 150 | 2800 3000 |
| 750XDS | 750kg | 1460 × 2130† × 2000 | 1410 × 2000 | 2050 × 2400 | 150 | 3000 |
| 1000D 1500D |
1000kg 1500kg |
1460 × 1435† × 2000 | 1410 × 2000 | 2050 × 1700 | 150 | 3000 3200 |
| 1000DS 1500DS |
1000kg 1500kg |
1460 × 1735† × 2000 | 1410 × 2000 | 2050 × 2000 | 150 | 3000 3200 |
Explanatory notes
All dimensions are nominal and in mm.
Concertina gates available on all Goodsmaster Classics.
Motor Housing: It will be necessary to provide access for servicing via lockable double hinged doors for the full depth of the lift shaft. These are available from Stannah as an option.
Pit or Ramp: The Goodsmaster normally serves at floor level and would require a pit in the lowest floor. If you are unable to provide a pit, the Goodsmaster can be installed to serve at 150mm above the lowest floor and a ramp will be need to be provided by your builder or by Stannah as an additional option.
† Car Depth: With a through car entrance arrangement, the inside car depth reduces by 25mm nominal.
N.B. Consideration must be given to protect any accessible space beneath the bottom of the lift shaft. Please contact Stannah for further information.
Key to model codes
B: Single Hinged Door
EU: Double Hinged Door
S: Single Hinged Door
D: Double Hinged Door
DS: Double Hinged Door