Stannah Service & Goods Lifts
Microlift – 50kg/100kg Bottom Drive
An alternative option for those with restricted headroom, the motor unit is located at the bottom of the shaft giving reduced headroom and easier maintenance access. Loading and serving is from a counter level entrance with rise and fall shutters.
Specifications
Car
Constructed in mild steel, finished in grey baked enamel (RAL 7038) with a stainless steel base and a removable stainless steel shelf. The car can also be finished in stainless steel.
Speed
0.35m/s
Entrances
High quality, smooth operation rise and fall shutters are fitted with safety locks and can be finished in either grey baked enamel or stainless steel. Hinged doors are available as an option on all models.
Car entrance protection
To meet the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations, the lift car is supplied with car entrance protection as standard. This protects goods from falling whilst the lift is in motion.
Entry choice
Up to two entrances can be fitted on each floor.
Control
Fully automatic push button control with call and despatch facilities at each entrance for ease of use.
Indicators
“Lift arrival”, “lift occupied” and “lift position” indicators are fitted at each entrance, together with an audible lift arrival buzzer.
Travel
Up to 12 stops over a total distance of 30m of travel.
Mounting
The Microlift is supplied in a structure-supported frame which is galvanised for longer life. We do not require a separate motor room or “load-bearing” lift shaft. For more information, please ask for our builder's work details.
Motor
Mounted at the top of the lift structure, the smooth, quiet motor drives a high quality reduction gearbox fitted with a traction vee-sheave. An electro-magnetic disc brake is supplied, with emergency release mechanism. The reliable controller and counter-balance drive system ensure electrical consumption is minimal.
Safety
Complies with the Essential Safety Requirements (ESRs) of the Machinery (Safety) Regulations, also known as the Machinery Directive and EN 81-3 where applicable.
Technical Data
| Model | Capacity | Car Dimensions (w × d × h) |
Entrance (w × h) |
Serving Height (variable) |
Shaft (w × d) |
Pit Depth |
Headroom |
|---|---|---|---|---|---|---|---|
| DD50 BD | 50kg | 510 × 320 × 800 | 320* × 770 | 800 | 725 × 550 | - | 2250 |
| 50A BD | 50kg | 545 × 420 × 800 | 420* × 770 | 800 | 850 × 670 | - | 2250* |
| 50B BD | 50kg | 520 × 520 × 800 | 420 × 770 | 800 | 830 × 800 | - | 2250* |
| 50C BD | 50kg | 620 × 620 × 800 | 520 × 770 | 800 | 930 × 900 | - | 2250* |
| 100A BD | 100kg | 720 × 720 × 800 | 620 × 770 | 800 | 1030 × 1000 | - | 2250* |
| 100B BD | 100kg | 820 × 820 × 800 | 720 × 770 | 800 | 1130 × 1100 | - | 2250* |
Explanatory notes
All dimensions are nominal and in mm. Please contact us for a bespoke solution if you are unable to achieve our standard dimensions.
* If adjacent openings are required increase headroom dimension by 200mm
Entrances are available on two sides on all floors with the following exceptions:
Entrance C only on the DD50 BD model
Some of the dimensions can be varied to suit individual requirements by modification of stock models or by special manufacture – please contact us for details.
For full technical advice please contact us.
Range of finishes
The Microlift is available in a range of RAL colours - please contact us for details.